Highly Purified Media
Pure (Clean) Steam Generator
INJECTABLE ITEMS
Pure Steam Generator Plant is available in various configurations with a wide range of instrumentation for untouched fully automated operation.
It is designed and fabricated as per fabrication code ASME SEC Vii DIVI & TEMA.
Application:
To produce pyrogen-free sterile steam conforming IP/BP/USP for sterilization of Process Vessels, Pipelines, and Autoclave & maintain the humidity of the manufacturing area.
Optional Accessories :
• NCGR Column • SCADA with IPC
- The fundamental operating principle involves using Distillation by Thin Film Evaporation.
- Capacity available 50 to 5000 liters/hr.
- Double Tube Sheet Construction for Main Evaporator Column to avoid cross-contamination.
- Electro-polished SS316L tubes to provide a smoother surface for complete water drain and reduce erosion-corrosion
- All pipe joints are orbital welded
- CFR 21 – Part 11 compliance food grade Teflon gaskets
- Low maintenance cost
- High-Pressure Centrifugal pump for Feedwater
- Online monitoring of feed water & PSG Conductivity with Cooling condenser
- The highest quality of pure steam, a patented three-stage process for separating pyrogens, and a continuous method for removing blowdown.
- Fully Automated PLC-based system with four levels of security
- Auto Drainage system for the first Column
- Complete Steam Station for Raw Steam with PID pneumatic valve.
- Cartridge Type Filter Housing for Feed Water.
SYSTEM REQUIREMENT
Feed Water:
• Purified water as per USP32 with max conductivity of 1 micro-ohm.
• Pressure should be 1kg/cm2 higher than the raw steam pressure.
• Temperature Ambient 30OC
Feed Steam:
• Steam must be saturated, dry free from oil, vapors & other impurities. (A steam filter to obtain 3µ, clear quality steam)
• Steam pressure min 6kg/cm2 is essential to guarantee pyrogen-free distillate.
750 Kg.
500 Kg.
